Shaft handle, injection moulded, for round profile

Material: PVC, TPE
  • sturdy
  • Durable
  • ergonomically shaped
  • manufactured to exact specifications
  • high-grip wave pattern
  • Standardised sizes
  • for round profiles and round tubes
Shaft handle, injection moulded, for round profile

Type of execution

Tolerances:

  • DIN 16742 - TG6

This corresponds to a medium to fine production accuracy for thermoplastic injection moulded parts where there are no extreme precision requirements but high quality is still needed.

Article features

Injection-moulded wave-shaped handles from HAMCO combine an ergonomically shaped wave geometry with the flexible properties of soft PVC or TPE. The continuous wave shape allows for a comfortable grip from various positions. The plastic injection moulding process enables precise and reproducible shaping of both the internal and external geometries.

An overview of the key product features:

  • Manufacture using cost-effective plastic injection moulding
  • Available in either soft PVC or TPE
  • Circumferential wave pattern for a good grip from different gripping positions
  • Elastic materials for easy fitting to round profiles and round tubes
  • Manufactured slightly undersized to ensure a secure fit on the round profile
  • Standardised sizes from existing injection moulding tools
  • Colour schemes tailored to specific orders in accordance with RAL specifications; custom colour matching is also possible
  • Special versions available on request

Application examples

Injection-moulded wave-shaped handles from HAMCO are ideal wherever round tubes or round profiles need to be fitted with a non-slip handle that is comfortable to use. The circumferential corrugated design allows the handle to be gripped from various positions, making it suitable for a wide range of applications in industry and the trades.

Typical areas of application include:

  • Hand tools
  • Control levers and operating elements
  • Machinery and production facilities
  • Transport and lifting equipment
  • Clamping devices
  • Workshop and industrial equipment
  • Equipment and Apparatus Manufacturing
  • Fitness and sports equipment

Precise shaping through plastic injection moulding

In plastic injection moulding, both the internal contour and the circumferential rib geometry of the handle are determined by the injection mould. This enables defined wall thicknesses, radii and transitions to be produced with a high degree of repeatability.

The symmetrically circumferential waveform allows the grip to be applied from different positions. At the same time, the internal contour is designed to fit the specified round profiles or round tubes.

HAMCO has injection moulds available for various handle sizes. This means that numerous applications can be realised without the need to manufacture a new injection mould.

Installation and secure fastening

The inner contour of the corrugated handles is designed to fit the intended round profiles or round tubes. Thanks to a suitable undercut and the elastic properties of the material, the handle can be slid onto the round profile, where it sits securely.

Ease of fitting and subsequent hold are influenced, amongst other things, by the undersize, the material hardness and the surface finish of the round profile. A higher material hardness can make fitting more difficult, but at the same time improve the hold of the fitted handle.

Depending on the application and the stresses involved, it may be advisable to secure the part further using a suitable adhesive.

Injection-moulded or dip-coated wavy handles?

HAMCO manufactures corrugated handles for round profiles using both plastic injection moulding and the PVC dip-coating process. Both processes enable the cost-effective production of functional and durable handles, but differ in terms of shaping and the tooling required.

In plastic injection moulding, the internal and external geometries are defined by the injection mould. This makes it possible, in particular, to produce circumferential curves, radii and transitions with precision and a high degree of repeatability.

In the PVC dip-coating process, on the other hand, the outer contour is formed by the continuous build-up of a layer of PVC plastisol on the heated dip mould. The wall thickness is influenced, amongst other things, by the mould temperature, the dwell time in the dip bath and the viscosity of the plastisol.

Which process is more suitable from an economic and technical point of view depends, in particular, on the requirements for the handle geometry, the quantities required and the tooling costs.

Material

HAMCO manufactures injection-moulded wavy handles from a choice of two elastic materials:

  • Soft PVC: approx. 78 Shore A
  • TPE (thermoplastic elastomer): approx. 68 Shore A

Both materials enable the production of flexible, wavy grips that feel comfortable to the touch. Thanks to their different material properties, they offer the possibility of tailoring the grips to the requirements of the specific application.

For outdoor applications, UV-stabilised materials can also be used on request. Other material variants and hardness grades can also be considered on request.

Important quality information

Injection-moulded handles have visible mould parting lines and sprue marks due to the manufacturing process. These are caused by the shaping process within the injection mould and are characteristic features of the manufacturing process.

Depending on the material, colour scheme and tool surface, there may also be slight variations in the surface appearance.

These manufacturing-related characteristics do not necessarily constitute a quality defect. The agreed requirements for the component are decisive.

Further information

Technical articles on the HAMCO blog

Expertise in plastics processing, materials and technical applications.

FAQ – Frequently Asked Questions

Answers to frequently asked questions about plastics, manufacturing processes and technical possibilities.

Plastic injection moulding process

Find out how injection moulding is used to produce precision-moulded plastic components.

Plastic firecracker

Fascinating stories and clear explanations from the world of plastics.

Your enquiry to HAMCO

Are you interested in our injection-moulded corrugated handles? Please let us know which version you require. To ensure we can process your enquiry effectively, it would be particularly helpful if you could specify the desired material (soft PVC or TPE), the diameter of the round profile, the desired colour according to the RAL colour chart, and the quantity required.

In the event of special installation situations or requirements that differ from the existing designs, you may also provide us with a drawing or a sample.

Product table

MaterialØA [mm]L [mm]For pipe Ø [mm]For pipe Ø [inch]Drawing no.
PVC19,511720 to 2125/32969900001517-4
PVC2111721.3 to 2227/32969900001519-4
PVC24117251969900001060-4
PVC2511725 to 261969900001062-4
PVC26117271(1/16)969900001064-4
PVC3211733969900001521-4
PVC33117341(11/32)969900001523-4
TPE19,511720 to 2125/32969900001518-4
TPE2111721.3 to 2227/32969900001520-4
TPE24117251969900001061-4
TPE2511725 to 261969900001063-4
TPE26117271(1/16)969900001065-4
TPE3211733969900001522-4
TPE33117341(11/32)969900001524-4

Shaft handle, injection moulded, for round profile - Enquire now

Supplier to the industry

Large and small quantity requirements Direct processing

Supplier to the technical trade

Large and small quantity requirements

Note on mandatory fields and data protectionThe mandatory field is marked. All other fields are voluntary. Your data will only be collected and stored electronically strictly for the purpose of processing and answering your enquiry. Information on data processing can be found here: Data protection.
Permitted file formats: pdf, jpg, dxf, stp, step, igs, tif, dwg, zip, jpeg (max. 6MB per file)