
This corresponds to a medium to fine production accuracy for thermoplastic injection moulded parts where there are no extreme precision requirements but high quality is still needed.
We have briefly summarised the features of our injection-moulded round handles for round profiles for you:
Injection-moulded round grips from HAMCO are used wherever round tubes or round profiles need to be fitted with a non-slip plastic surface to serve as a handle, control knob or retaining element.
Typical examples of applications include:
Mould-based shaping in the plastic injection moulding process enables the consistent production of round handles with defined internal and external contours. This ensures consistent dimensions and reproducible assembly characteristics in series production.
The interplay between the internal geometry, material hardness and external diameter of the round tube or round profile is particularly crucial for assembly and subsequent stability.
Thanks to its slightly smaller diameter and the elastic properties of the material, the round handle can be slid onto the round tube or round profile, where it sits securely.
Ease of fitting and subsequent hold are influenced, amongst other things, by the undersize, the material hardness and the surface finish of the round profile. A higher material hardness can make fitting more difficult, but at the same time improve the hold of the fitted handle. For softer material variants, depending on the application and the loads involved, additional securing with a suitable adhesive may be recommended.
If the installation forces are high, gently heating the round handle to around 50 °C can make installation easier, provided the material used is suitable for this. Alternatively, standard window cleaner can be applied or sprayed onto the round tube or round profile. It temporarily forms a lubricating film that makes sliding the handle on easier; this effect wears off once the cleaner has dried.
For different dimensions or specific requirements regarding the handle geometry, you can customised plastic solutions to be tested with the involvement of our in-house toolmaking department.
HAMCO manufactures injection-moulded round handles, either from soft PVC with a hardness of approximately 78 Shore A or from thermoplastic elastomer (TPE) with a hardness of approximately 68 Shore A.
Both materials offer elastic properties and a pleasant feel. The difference in material hardness affects, amongst other things, flexibility, the feel to the touch and assembly characteristics.
The choice of material suitable for a particular application depends on the mechanical stress requirements, the operating environment and the desired performance characteristics. Different degrees of hardness or specific material properties can be assessed on request.
Injection-moulded handles have visible mould parting lines and sprue marks due to the manufacturing process. These are caused by the shaping process within the injection mould and are characteristic features of the manufacturing process.
Depending on the material, colour scheme and tool surface, there may also be slight variations in the surface appearance.
These manufacturing-related characteristics do not, as a rule, constitute a quality defect.
On the HAMCO blog, the company regularly publishes specialist articles on plastics, manufacturing, applications and technical issues.
Answers to frequently asked technical questions about plastics, materials, manufacturing processes and their applications.
Technical concepts explained in an accessible way – with a high standard of technical rigour and a slightly different perspective on plastics and their properties.
Are you interested in our injection-moulded round handles made from soft PVC or TPE?
Please select the appropriate version from the product table below based on the intended pipe diameter and the required material. When making your enquiry, please state the relevant drawing number and the quantity required.
In the case of special installation scenarios or geometries that differ from the standard designs, you can also provide us with a drawing or a sample of the component.
HAMCO will be happy to assist you in selecting a suitable model and, if required, will also look into bespoke solutions.
| Handle type | Material | ØA [mm] | L [mm] | For pipe Ø [mm] | For pipe Ø [inch] | Drawing no. |
|---|---|---|---|---|---|---|
| Round handle | PVC | 19,5 | 112 | 20 to 21 | 25/32 | 969900001525-4 |
| Round handle | PVC | 21 | 112 | 21.3 to 22 | 27/32 | 969900001527-4 |
| Round handle | PVC | 24 | 112 | 25 | 1 | 969900001529-4 |
| Round handle | PVC | 25 | 112 | 25 to 26 | 1 | 969900001531-4 |
| Round handle | PVC | 26 | 112 | 27 | 1(1/16) | 969900001533-4 |
| Round handle | PVC | 32 | 112 | 33 | 969900001056-4 | |
| Round handle | PVC | 33 | 112 | 34 | 1(11/32) | 969900001058-4 |
| Round handle | TPE | 19,5 | 112 | 20 to 21 | 25/32 | 969900001526-4 |
| Round handle | TPE | 21 | 112 | 21.3 to 22 | 27/32 | 969900001528-4 |
| Round handle | TPE | 24 | 112 | 25 | 1 | 969900001530-4 |
| Round handle | TPE | 25 | 112 | 25 to 26 | 1 | 969900001532-4 |
| Round handle | TPE | 26 | 112 | 27 | 1(1/16) | 969900001534-4 |
| Round handle | TPE | 32 | 112 | 33 | 969900001057-4 | |
| Round handle | TPE | 33 | 112 | 34 | 1(11/32) | 969900001059-4 |
Large and small quantity requirements Direct processing
Large and small quantity requirements
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information