
The recessed handles are manufactured using the PVC dip-coating process, with recesses on the sides, for fitting to rectangular tubes and rectangular sections.
The minimum wall thickness required at the open end depends on the size of the handle. The minimum wall thicknesses for the available standard dimensions are specified in the product table.
We have summarised the key features of our countersunk trough handles for rectangular profiles for you:
Dipped recessed handles for rectangular profiles are suitable for operating, adjusting and hand grips with a rectangular cross-section. Typical applications include:
The flexible PVC trough handles are manufactured slightly undersized and slid onto the rectangular tube or profile. During installation, the flexible material stretches and then moulds itself to the outer contour of the rectangular profile. This ensures that the trough handle is securely fitted and cannot come loose.
The product table shows which handle size is specified for the respective cross-sectional dimensions. The desired handle length H can be selected within the range specified there.
If the installation forces are high, gently heating the recessed handle to around 50 °C can make installation easier. Alternatively, standard window cleaner can be applied or sprayed onto the rectangular profile. This temporarily forms a lubricating film that makes sliding the profile into place easier; its effect wears off once it has dried.
Suitable smooth areas of the bucket handle can also be printed on. Operating instructions, markings or company logos can be printed as part of the Printing and assembly be applied directly to the handle of the bucket.
HAMCO uses soft PVC from the Covytec® range to manufacture its dip-moulded recessed handles. Covytec® 6691, with a hardness of 71 Shore A, is used as the standard material.
Further Covytec® material variants allow for different hardness settings and adaptation to the specific requirements of various industries and applications. These include, for example, phthalate-free, medical-grade, ESD-compliant or detectable material variants, as well as versions with enhanced UV stabilisation.
How elastic dip-moulded parts are produced from liquid PVC plastisol, and which factors influence their properties and dimensions.
On the HAMCO blog, the company regularly publishes specialist articles on plastics, manufacturing, applications and technical issues.
Answers to frequently asked technical questions about plastics, materials, manufacturing processes and their applications.
Technical concepts explained in an accessible way – with a high standard of technical rigour and a slightly different perspective on plastics and their properties.
To ensure your enquiry is dealt with promptly, we require the following details:
In the case of special installation scenarios or geometries that differ from the standard application, you can also provide us with a drawing or a sample of the component.
| Kind | Nominal dimension A [mm] | Nominal dimension B [mm] | Minimum height H. [mm] | Maximum height H. [mm] | S min. [mm] | Suitable for A x B [mm] |
|---|---|---|---|---|---|---|
| RE - Recessed handle | 5 | 24 | 90 | 120 | 1.8 | 5 x 24,5 - 26 |
| RE - Recessed handle | 6 | 24 | 110 | 120 | 1.8 | 6 x 24,5 - 26 |
| RE - Recessed handle | 6 | 30 | 80 | 140 | 1.8 | 6 x 30,5 - 32 |
| RE - Recessed handle | 7 | 22 | 80 | 130 | 1.9 | 7 x 22,5 - 24 |
| RE - Recessed handle | 8 | 30 | 80 | 135 | 1.8 | 8 x 30,5 - 32 |
| RE - Recessed handle | 10 | 22 | 95 | 140 | 1.8 | 10 x 22,5 - 24 |
| RE - Recessed handle | 10 | 24 | 145 | 150 | 1.5 | 10 x 24,5 - 26 |
| RE - Recessed handle | 30 | 30 | 120 | 120 | 2 | 30 x 30,5 - 32 |
Large and small quantity requirements Direct processing
Large and small quantity requirements
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information