Moulded recessed handle, for round profile

Material: PVC, TPE
  • sturdy
  • Durable
  • ergonomically shaped
  • manufactured to exact specifications
  • pronounced finger indentations
  • Standardised sizes
  • for round profiles and round tubes

Type of execution

Tolerances:

  • DIN 16742 - TG6

This corresponds to a medium to fine production accuracy for thermoplastic injection moulded parts where there are no extreme precision requirements but high quality is still needed.

Article features

Injection-moulded recessed handles from HAMCO combine an ergonomically shaped finger recess design with the flexible properties of soft PVC or TPE. The pronounced finger recesses provide defined contact surfaces for the fingers and facilitate a comfortable and controlled grip.

An overview of the key product features:

  • Manufacture using cost-effective plastic injection moulding
  • Available in either soft PVC or TPE
  • Flexible materials for easy assembly
  • Standardised sizes
  • Colour matching to order in accordance with RAL specifications
  • Custom colour matching and special designs available on request

Application examples

Injection-moulded recessed handles from HAMCO are suitable for a wide range of applications in industry and the trades. Wherever round tubes or round profiles are used as handles, control elements or parts of an operating mechanism, the pronounced finger recesses can facilitate comfortable and controlled handling.

Typical areas of application include:

  • Hand tools
  • Control levers and operating elements
  • Machinery and production facilities
  • Transport and lifting equipment
  • Clamping devices
  • Workshop and industrial equipment
  • Equipment and Apparatus Manufacturing
  • Fitness and sports equipment

Precise shaping through plastic injection moulding

In plastic injection moulding, both the internal contour and the distinctive finger-grip geometry of the handle are determined by the injection mould. This enables defined wall thicknesses, radii and transitions to be produced with a high degree of repeatability.

The design of the finger recesses allows the grip geometry to be tailored specifically to the intended application. At the same time, the internal contour is adapted to the intended round profiles or round tubes.

HAMCO has injection moulds available for various handle sizes. This means that numerous applications can be realised without the need to manufacture a new injection mould.

Installation and secure fastening

The inner contour of the corrugated handles is designed to fit the intended round profiles or round tubes. Thanks to a suitable undercut and the elastic properties of the material, the handle can be slid onto the round profile, where it sits securely.

Ease of fitting and subsequent hold are influenced, amongst other things, by the undersize, the material hardness and the surface finish of the round profile. A higher material hardness can make fitting more difficult, but at the same time improve the hold of the fitted handle.

Depending on the application and the stresses involved, it may be advisable to secure the part further using a suitable adhesive.

Material

HAMCO manufactures its injection-moulded bin handles as standard from two flexible plastic materials:

  • Soft PVC: with a hardness of approx. 78 Shore A
  • TPE (thermoplastic elastomer): with a hardness of approx. 68 Shore A

Both materials allow for the production of flexible handles with pronounced finger recesses. The different degrees of hardness make it possible to select handles to suit the requirements for handling, assembly and grip.

For outdoor applications, UV-stabilised materials can also be used on request.

Colours are specified on a per-order basis in accordance with RAL standards. Custom colour matches are available on request. The colours and shades available for a particular production run depend on the material selected and the quantity required.

Important quality information

Injection-moulded handles have visible mould parting lines and sprue marks due to the manufacturing process. These are caused by the shaping process within the injection mould and are characteristic features of the manufacturing process.

Depending on the material, colour scheme and tool surface, there may also be slight variations in the surface appearance.

These manufacturing-related characteristics do not necessarily constitute a quality defect. The agreed requirements for the component are decisive.

Further information

Recessed handles produced using the PVC dip-coating process

In addition to injection-moulded bucket handles, HAMCO also manufactures dip-moulded bucket handles from soft PVC. The two manufacturing processes offer different options in terms of shaping, tooling and component design.

Find out more about our dipped plastic parts and that PVC dipping process.

Technical articles on the HAMCO blog

Technical background information, examples of use and practical tips from the plastics processing industry.

FAQ – Frequently Asked Questions

Answers to frequently asked questions about plastic parts and manufacturing processes.

Plastic injection moulding process

Interesting facts about the manufacture of plastic parts using the injection moulding process.

Plastic firecracker

Plastics knowledge explained simply using clear examples.

Your enquiry to HAMCO

Are you looking for the right trough handle for your application? HAMCO can help you choose a suitable model from our existing range and advise you on any special requirements.

Please let us know which type of handle you require and what the handle is intended for.

To ensure we can process your enquiry effectively, it would be particularly helpful if you could provide details of the pipe or profile diameter, the required material (PVC or TPE), the quantity required and, if applicable, your colour preferences.

In the event of special installation situations or requirements that differ from the existing designs, you may also provide us with a drawing or a sample.

Product table

MaterialØA [mm]L [mm]For pipe Ø [mm]For pipe Ø [inch]Drawing no.
PVC19,511220 to 2125/32969900001066-4
PVC2111221.3 to 2227/32969900001068-4
PVC24112251969900001507-4
PVC2511225 to 261969900001509-4
PVC26112271(1/16)969900001511-4
PVC3211233969900001513-4
PVC33112341(11/32)969900001515-4
TPE19,511220 to 2125/32969900001067-4
TPE2111221.3 to 2227/32969900001069-4
TPE24112251969900001508-4
TPE2511225 to 261969900001510-4
TPE26112271(1/16)969900001512-4
TPE3211233969900001514-4
TPE33112341(11/32)969900001516-4

Moulded recessed handle, for round profile - Enquire now

Supplier to the industry

Large and small quantity requirements Direct processing

Supplier to the technical trade

Large and small quantity requirements

Note on mandatory fields and data protectionThe mandatory field is marked. All other fields are voluntary. Your data will only be collected and stored electronically strictly for the purpose of processing and answering your enquiry. Information on data processing can be found here: Data protection.
Permitted file formats: pdf, jpg, dxf, stp, step, igs, tif, dwg, zip, jpeg (max. 6MB per file)